Serial production of new items

Protection of road korrozii

Защита автомобиля от коррозии

антикор новый автомобильСпонсор поста компания krown.moscow

Anti-corrosive agent is applied to a clean and dry surface of the car. The vehicle should be carefully prepared to spray on metal anticorrosive.

For a start, All valuables should be removed from the cabin, special film cover and seat upholstery. Next, get everything out of the trunk and also cover it with a special film. It is also necessary to remove the spare tire, remove belts and remove the wiper blade.

In the car, beyond the outer parts of the body, there are secret places, which are available to the human eye. There are several ways, by which, You can reach them.

At the surface of the car can be drilled holes, and through the spray anticorrosive. Alternatively, You can use special equipment for applying protective mixture. This method is performed in specialized shops and it is used much less frequently. Typically, anti-corrosive technology applied pressure spray. When it comes into contact with air, mist is formed, which lays down an even layer on the surface of the car.

Most wear and corrosion of exposed aggression - the wheel arches and the bottom of the vehicle. A few words about them. It is necessary to clean the surface from rust (it can be a conventional trowel), then you can apply anticorrosive. The mixture retains its concentration, as though sprayed, but not mixed with air. Should be applied to the drug is not thick, otherwise it will be possible delamination of a metal surface.

In order to guarantee the protection of the drug for a long time, need to give otsoyatsya corrosion agents during the day. Not recommended for use during this period car. If there is a continuing need in the car, it should move very cautiously. When excessive heating, In some machines, anticorrosive can catch fire.

Can also, at the request of the vehicle owner, clean the metal from chemical compounds and old varnish - polish. Polish rubbed into the sponge, polishing is carried out manually. Next, rub the wool surface preparation. When using polishes, The following manipulations are possible after a week.

Can also, at the request of the vehicle owner, clean the metal from chemical compounds and old varnish - polish. Polish rubbed into the sponge, polishing is carried out manually. Next, rub the wool surface preparation. When using polishes, The following manipulations are possible after a week.

Добавить комментарий